ALINCO DR-135

– TX(T):144-147.995MHz (FM)
– RX(T): 118-135.995 MHz (AM)
– 136-173.995MHz (FM)
– TX&RX(E): 144-145.995MHz
– Operating mode 16K0F3E (FM)/8K50F3E (Narrow-FM)
– F1(9600bps)/F2(1200bps)/10F3 * 1 /A3E (RX only DR135TMkII)
– Channel steps 5, 8.33, 10, 12.5, 15, 20, 25, 30, 50 KHz
– Memory channel 100 channels + 1 quick recall (CALL)
– Antenna impedance 50ohm unbalanced
– Frequency stability +/- 2.5ppm TCXO
– Power supply requirement 13.8V DC +/- 15% negative ground
– Current drain Approx. 11.0A TX High
– Approx. 0.4A squelched
– Usable temperature range -10 – +60c (14 – 140F)
– Dimensions (w/o projection) 142(W) x 40(H) x 174(D) mm
– 5.59″(W) x 1.57″(H) x 6.85″(D)
– Weight Approx. 1.0Kg (35.3oz)
– CTCSS tone encoder/decoder 39 tones
– Digital Coded Squelch encoder/decoder 104 codes
– Transmitter
– Output power Approx. 50W (HI)
– Approx. 20W (MID)
– Approx. 5W (LOW)
– Modulation system Variable reactance frequency modulation
– Spurious emission Less than -60 dB
– Maximum frequency deviation +/- 5 KHz (FM) / +/- 2.5 KHz (NFM)
– Receiver
– Receive system Double-conversion superheterodyne
– Sensitivity (-12dB SINAD) *2 Less than -16.0dBu
– Intermediate frequency 1st IF 21.7 MHz, 2nd IF 450 KHz
– Selectivity *2 -6dB: 12KHz or more
– 60dB: 28KHz or less (FM)
– 6dB: 6KHz or more
– 60dB: 16KHz or less (NFM)
– Audio output power More than 2W(8ohm 10%THD)

Note:
* 1 Optional units required
* 2 Typical within the amateur radio band(s).

Optional Accessories

– Microphones EMS-53 Plain microphone
– EMS-57 DTMF/Remote microphone
– Separation Cable
– Digital voice unit EJ-47U
– TNC unit EJ-41U
– DC Power supply DM330MVT (120VAC) 30A switching
– DM330MVE (240VAC) 25A switching